Druckmessung, Lecksuche und Steuerung
Today, the total range of vacuum pressure accessible to measurement extends from atmospheric pressure (about 1000 mbar (750 Torr)) down to 10-12 mbar/ 0.75•10-12 Torr, i.e. it extends over 15 powers of ten. The instruments used for measuring the pressure within this wide range are called vacuum gauges. For physical reasons it is not possible to create a single vacuum sensor through which it might be possible to perform quantitative measurements within the entire pressure range. Therefore, a variety of different vacuum gauges are available, each with their own characteristic measurement range which commonly extends over several powers of ten.
Druckmessung, Lecksuche und Steuerung
Material Gehäuse
Material Dichtung
- EPDM (ethylene propylene diene monomer) (6)
- FFKM (1)
- FKM (2)
Min. Druckmessung
- 100.00 Pa (5)
- 500.00 Pa (2)
- 1.000 10⁻⁷ Pa (69)
- 10.00 Pa (2)
- 1.000 Pa (8)
- 0.100 Pa (8)
- 1.000 10⁻² Pa (17)
- 1.000 10⁻³ Pa (7)
- 13.30 Pa (8)
- 5.000 10⁻⁸ Pa (13)
- 0.050 Pa (34)
- 5.000 10⁻³ Pa (7)
Max. Druckmessung
- 133.00 Pa (8)
- 1330.00 Pa (8)
- 1.000 Pa (43)
- 13.30 Pa (7)
- 13300.00 Pa (8)
- 1.000 10⁵ Pa (39)
- 1.013 10⁵ Pa (43)
- 1.020 10⁵ Pa (2)
- 1.200 10⁵ Pa (7)
- 1.333 10⁵ Pa (8)
- 20000.00 Pa (2)
- 2.000 10⁵ Pa (5)
Kühlmethode
Saugvermögen
- 0.000 10⁰ m³/s (1)
- 3.000 10⁻³ m³/s (6)
Ansaugflansch / Einlass
- 1/8" NPT Male (9)
- 8" VCR Female (10)
- bare tube ( 1/2" OD Tube) (9)
- DN 16 CF (1.33") (16)
- DN 16 ISO-KF (NW16) (52)
- DN 20 ISO-KF (NW20) (4)
- DN 25 ISO-KF (NW25) (44)
- DN 40 CF (2.75") (29)
- DN 40 ISO-KF (NW40) (23)
In Ihren Warenkorb gelegt
Produktverfügbarkeit in Lagerstandort
Stunden